Fresh vegetables & fruits cold room

Fresh vegetables & fruits cold room   1.Cold room panel (1)Polyurethane sandwiched panels are of 100% Polyurethane insulation, which is constructed by being foamed in place with retarted Polyurethane using high pressure. They have certain dimensions. Standard widths of panels are a multiple of 1183mm. The maximum lengths of panels are 13.5M. Non-standard sizes are also available upon request with price varying.   (2) Panel thickness. Different thickness panel is used in different temperature cold room .Panel thick Operating temperature    50mm 5degree C or above 
75mm -5degree C or above 
100mm -25degree C or above 
150mm -45degree C or above 
200mm -55degree C or above     (3) Our cold room panels meets JB/6527-2006<modular cold room insulation sandwiched panel’s technology conditions> standard request.

No.	Inspection item	Unit	Technology inspection	Inspection result
1	density	kg/m3	32~50	43
2	compressing strength (10% deformation)	Kpa	≥160	200
3	Bending strength	Kpa	≥245	331
4	Absorbing rate	%	≤4	3
5	Heating coefficient	W/m.k	0.024	0.024
6	Average burning time	S	≤30	3
7	Average burning height (vertical)	S	≤250	250

  (4)The foaming material we choose is imported BASF (US brand) foaming material, green to the environment. 
The steel sheet we purchase from Baosteel and POSCO which are the biggest steel factories in the world, they promise the painted galvanized steel they produce will not fade in 15 years.   (5) The cold room panels male and female, cam lock type, use hexagonal key to assemble.   2.Cold room door
There are convex door, hinged door, sliding door,glass door etc for option.       3.Cold room refrigeration unit Copeland/Bitzer/Zanotti refrigeration unit R404 refrigerant Air cooled system   4.Production line of cold room. 5.Packing and loading     6.To make a fast and detailed quotation for you,we would like you to answer some questions about this product as following:   1)What’s the products do you want to store in this cold room?

2)Will this cold room be installed inside building or put outside?

3)Could you provide the detailed inside dimension of this cold room?(m)

4)What’s the thickness of cold room panel?(Including the wall panel, floor and roof panel)(mm)

5)Which kind of door do you prefer,convex door, hinged door or sliding door? Color steel or stainless steel?

6)How much kilograms of products will be put in cold room per once(kg/once)?

7)What’s the required temperature inside the cold room(°C)?

8)What’s the ambient temperature?

9)Original temperature of products before put into the cold room(°C)

10)How many hours do you want to cool the products down to the required temperature?

11)Which refrigerant required for the refrigeration unit? R22 or R404A,R134A or others?

12)What’s the voltage/phase/frequency in your place?   7.Cold room project   8.Exhibition