Non-woven seam sealing tape for clothing

Under the category of hot-melt adhesive, its product types are very rich, among which hot-melt adhesive film and hot-melt adhesive mesh film are widely used in the compounding of materials. The composite bonding of non-woven materials uses hot-melt adhesive mesh film-based thermal adhesives. The specific selection skills can be summarized into the following aspects.
1. Non-woven and non-woven composite selection
The composite bonding of non-woven fabrics and non-woven fabrics is difficult to select. In theory, hot-melt mesh films can be used as composite adhesives. However, if this type of composite needs to consider the washing resistance, it can be selected from three types of hot-melt adhesive mesh films: pa, pes, and tpu.
2. Composite selection of non-woven fabrics and leather
The composite bonding of non-woven fabrics and leather materials is generally recommended to use hot-melt adhesive mesh film of pa material type. As for which melting point and gram weight to choose, it depends on the specific composite process.
3. Composite selection of non-woven fabrics and metal materials
There are not many options for composite bonding of non-woven fabrics and metal materials. Considering the adhesion of hot melt adhesive mesh to metal materials, it is recommended to use pes material type hot melt adhesive mesh.

Introduction of 3- Lyer Seam Sealing Tape

Non- woven Seam Sealing Tapes are used in seam sealing of medical protective clothing, anti- bacterial protective clothing and other Non- woven fabric products.

Medical

Protective clothing

Advantages

• Low application temperature
• Strong adhesive force
• Good cold resistance
• High flexibility

Parameter

• Model No: MN-3A/ MN-3B Series
• Color: White, Snow white, Sky blue, Green, Orange red...
• Thickness: 0.14mm
• Regular width: 18mm, 20mm, 22mm
• Washing: Good (40℃)
• Composition: polyester fabrics+ waterproof coating+ hot melt adhesive