Non-woven seam sealing tape for medical clothings

Hot melt adhesive film for non-woven fabrics, as the name suggests, refers to the type of hot melt adhesive that is professionally used for composite bonding of non-woven materials. For those who are not familiar with hot melt adhesives and those who have not yet used hot melt adhesives, how to select the correct type is a very difficult problem. The composite selection of woven fabric and sponge material will be affected by the composite equipment, but it is basically the choice between the hot melt adhesive mesh of the two materials of pa and eva. If the composite equipment used is better and the temperature can meet the requirements of the pa hot melt adhesive mesh film, the pa hot melt adhesive mesh film is selected as the composite adhesive; if the composite equipment is relatively old and it is difficult to reach the melting point of pa, then only Optionally, eva hotmelt mesh can be used as the adhesive.

Introduction of 3- Lyer Seam Sealing Tape

Non- woven Seam Sealing Tapes are used in seam sealing of medical protective clothing, anti- bacterial protective clothing and other Non- woven fabric products.

Medical

Protective clothing

Advantages

• Low application temperature
• Strong adhesive force
• Good cold resistance
• High flexibility

Parameter

• Model No: MN-3A/ MN-3B Series
• Color: White, Snow white, Sky blue, Green, Orange red...
• Thickness: 0.14mm
• Regular width: 18mm, 20mm, 22mm
• Washing: Good (40℃)
• Composition: polyester fabrics+ waterproof coating+ hot melt adhesive